My washer, Maytag model MHWE200XW00, stopped going into the spinning cycle after it's done with washing and the water is drained. Any suggestions on what may be the problem are appreciated.
The door latch needs to be checked. The door latch can fail either mechanically or electrically. Test any switches on the door lock with an Ohm meter. The switches should have continuity. These door latches for front load washers can be found online for around $75 dollars.
Anonymous
The door latch needs to be checked. The door latch can fail either mechanically or electrically. Test any switches on the door lock with an Ohm meter. The switches should have continuity. These door latches for front load washers can be found online for around $75 dollars.