I have a GE Washer glwn5050m0ws that has stopped responding to the start button.
It will now flash the fill button and beep on a 20 second interval.
I have checked continuity between the plug and the motor through the lid switch and it registers the switch normally.
It is a post 2010 model, and the flashing light on the motor indicates it is good.
Putting it into diagnostic mode, the wash status lights flash instead of stay solid and position #1 lights rinse and spin, but not wash.
All other positions show normal.
Any advice you could give would be greatly appreciated!
It will now flash the fill button and beep on a 20 second interval.
I have checked continuity between the plug and the motor through the lid switch and it registers the switch normally.
It is a post 2010 model, and the flashing light on the motor indicates it is good.
Putting it into diagnostic mode, the wash status lights flash instead of stay solid and position #1 lights rinse and spin, but not wash.
All other positions show normal.
Any advice you could give would be greatly appreciated!
Please login or Register to submit your answer