Amana washer not spinning

Anonymous asked 5 years ago
I have a front loading washer Amana NFW7200TW.

2 days ago when it got to 9 minutes left in the cycle it stopped. I tried to do a master reset by unplugging the power cord for a minute, then open and close the door 6 times. It still does the same. Also if I turn it to the spin cycle only, it will drain some water, then stop draining and not spin.

Appliance Repair Questions
Staff replied 5 years ago

It may be possible that the drain pump or drain hose is clogged and not letting the washer drain correctly. <br><br>The washer may not go into any other wash mode if this is the case. <br><br>Try doing an empty load on the quickest wash cycle. <br><br>If problem persists, check the drain pump and hose for something that may be restricting water flow.

steve.schlabach
replied 5 years ago

I ran an empty load, it stopped at 9 minutes for a long time, then finally beeped a few times and the display blinks “nd”

Appliance Repair Questions
Staff replied 5 years ago

The ND error indicates NO DRAIN and is usually related to a drain pump problem. <br><br>Excess suds can also make the washer display ND error also. <br><br>Run the washer through a rinse cycle without a load or soap to see if that may fix the issue.