My Whirlpool electric wall oven has started beeping. I reset the breaker and now the panel shows PF. It has a padlock symbol and the word "Start". When I press the start button the clock goes out. If I press and hold the "oven off" button a code of E6 F2 appears. Is there something wrong with the keypad or control board or? Is there a way to reset it? Thanks
1 Answers
You may need to replace the control board.
- First disconnect power from your oven.
- Open the control panel and unplug the key pad ribbon from the control board.
- Wait 10 minutes then plug the key pad ribbon back into the control panel and turn the power on.
- Wait an hour and if the error code comes back then most likely you will need to remove and replace the control board.
Your Answer